![]() ![]() ![]() Use a different symbol for each type of device, these can be very simple if you’re not working on CAD. the positions of all manual call points, fire detectors and fire alarm devices. Mark the positions of all the fire alarm system devices.Also include the battery cabinets, if these are installed and remote to the panels, sometimes these are situated in cupboards or store rooms nearby. the positions of all control, indicating and power supply equipment. The positions of all the fire alarm control panels, repeater panels and all associated power supplies.Once you have your building drawings, according to BS5839-1:2013 Clause 40.2 (c) – AS-FITTED DRAWINGS, this is what should be included in the as-fitted drawings:. Remember, you’ll need these drawings for the zone plan too – just make sure all exit points, circulation areas and stairs are included as a minimum. Understandably, these may not always be available so hand drawn sketches will also suffice as long as they are an accurate representation of the building. You will be off to a great start if you can obtain full CAD quality plans. When installing or modifying a fire alarm system, as part of the document process, as-fitted drawings must be provided before commencing the work. To assist you with what is required here is a simple guide as to what these drawings should include.įirst of all you will need an adequate drawing of the building(s). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |